Product Overview
Gem Finishes, the etch resistant marcite alternative, are a mill prepared marcite alternative blended with the highest quality selected colored quartz aggregates, white portland cement and proprietary additives to enhance strength, density, bonding and curing. A Gem Finish will yield a hard, long lasting surface highly resistant to stains and spot etching prevalent with traditional pool plasters. Exposure of the aggregate produces a safe, slip resistant and non-abrasive surface that attains a compressive strength in excess of 3500 psi in 24 hours and exceeds 7000 psi in 28 days.
Feature Bullets
- Florida Gem Finish is formulated with natural quartz aggregate
- Florida Gem Finish will yield approximately 20-22 square feet of material per 80-pound bag
- All materials used in the manufacture of Gem Finish comply with ASTM C926-86 and ANSI 2 1971
Documents
California Proposition 65 WARNING: This product contains crystalline silica. Mixing, cutting, grinding or otherwise handling dry material can expose you to airborne crystalline silica (particles of respirable size), which is known to the State of California to cause cancer. Use respiratory protection and adequate ventilation when handling dry product. For more information go to www.P65Warnings.ca.gov.
